Why Above-ground pool must be leveled.

A leveled pool has a flat surface and no dips or bumps in it. When you are looking for an above-ground pool, this is what you want to look at.

An above-ground pool is also known as a backyard pool.  An above-ground pool must be leveled because it will have water in it. This means the bottom of your pool should be level with the ground. If there are any dips or bumps in your pool, then they can cause problems when you fill up your pool with water. Here’s why it is important to level your pool.

11 best and clever above-ground pool ideas

Leveling Your Above Ground Pool Is Important

This is what happens if an above-ground pool is not leveled. Leveling your above-ground pool yourself, and what to do after the pool has been leveled.

Why Do You Need To Level The Pool?

The first question that most people ask when they hear about leveling their above-ground pool is “why would I need to level my pool?” The answer is simple: a properly leveled pool will be more stable than one that is not leveled. A pool with uneven walls can cause water to splash out of it or even fall in on you!

If the pool is too high for you to reach the bottom of the pool, you may have trouble getting into the pool. This could lead to drowning accidents.

Major Issues with an Unlevelled Pool

An unlevel pool can also cause major issues with the pool pump. When the pool wall dips down, the pump can get stuck trying to push water up through the dip. This can cause the pump to burn out.

When looking at a pool leveler, there are several things to consider. First, make sure that the pool leveler is adjustable so that you can adjust the height of the pool as needed. Also, look for a pool leveler that comes with a safety strap. This way, you won’t have to worry about losing the device while adjusting the pool.

Another major issue is how easy it is to use. Some pool levelers require you to manually raise and lower them using levers. Others come with automatic controls. Make sure that the pool levelers that you purchase are easy to operate.

An unleveled pool can cause property damage. As mentioned before, pools can become unstable and tip over. They can also leak and cause mold growth.

An unlevel pool will result in an unleveled water level. If the pool is not level, then the water level will not be consistent. This means that the water level will not stay constant and may vary from time to time.

The best way to ensure a level pool is to have your pool professionally leveled before you fill it with water. A professional pool service can also help you maintain the proper water level for your pool.

How Does Unlevel Water Damage A Pool?

Unlevel water damage is a common problem that can occur in any home. It’s caused by the pool being out of level, which means it has an uneven surface. The result is that water sits on top of one area and sinks into another.

Unlevel water damage occurs because the water doesn’t flow evenly across the entire pool. This causes the water to sit on different parts of the pool. Over time, this can cause problems such as leaks, cracks, and other structural issues.

How To Level an Above Ground Pool?

If your water level is off by more than three inches you should fix it immediately. Otherwise, wait until the next day.

Fill the pool with water until it reaches the desired level. Once you’ve reached the correct level, remove all of the air bubbles from the water. Then, add some chlorine to keep the water clean.

Next, place the pool leveler on the ground near the edge of the pool. Adjust the pool leveler so that it is just touching the pool walls.

Once the pool leveler is adjusted correctly, tighten the straps around the pool leveler. You don’t need to use the straps if they were included with the pool leveler.

After tightening the straps, move the pool leveler back and forth along the pool walls until it is centered.

Once the pool leveler is properly aligned, turn it on. Let the pool leveler run for 30 minutes.

Remove the pool leveler from the pool and check its accuracy. If the pool leveler is still inaccurate, repeat steps 3-5.

Keep checking the pool level every few days until the pool is perfectly level.

What Should You Do After You Have Your Pool Leveled?

After you have had your pool professionally leveled, you should check the pool every day to make sure that the water level remains steady. Once you notice that the water level changes, contact your pool service provider immediately.

You should also check if the water is leaking. Leaks can cause serious damage to your pool. If you find that the water is dripping from the pool, call your pool service provider right away.

You should also check the pool for signs of mold. Mold can grow in stagnant water. If you see mold growing around the edges of the pool, you should clean it off immediately.

How Level Does A Pool Need to Be?

To determine how much your pool needs to be leveled, take a look at the following factors:

• How deep is the pool?

• How wide is the pool?

These two factors are important when determining how much your pool needs leveling. If your pool is too shallow or too wide, then you will need to adjust the depth of the pool.

If your pool is too deep, then you will need to increase the height of the pool.

When adjusting these factors, remember that the deeper the pool, the more difficult it is to level the pool. When adjusting the width of the pool, consider the size of the pool deck. The larger the pool deck, the easier it is to level the entire pool.

How To Level an Above Ground Pool After It’s Been Filled With Water?

Firstly drain your water out of the pool using a vacuum pump. Make sure that your pool is now dry.

Place your pool leveler into the pool and let it sit there for about half an hour.

After the pool has sat there for half an hour, check the pool level again. If the pool level is still incorrect, continue to follow this process until the pool leveler is accurate.

Now, you’re ready to start filling the pool up with water. Fill the pool up to the top of the pool leveler. Then, wait until the water reaches the top of the pool before turning the pool pump on.

Now, keep an eye on the pool level as the water fills up. As soon as the pool level reaches the top of the leveler, stop pumping the water.

Next, remove your pool leveler and place it back onto the pool floor.

Continue to monitor the pool level until the water level drops below the bottom edge of the pool leveler by one inch.

At this point, you can begin draining the water out of the pool.

It takes anywhere between 24 hours to 48 hours to completely level an above-ground pool after it has been filled with water. However, most pools require less than 30 minutes to level.


An above pool must be leveled as it can cause financial damage later on. By reading this article, now you can too check if your pool is leveled enough or not. Make sure to have a safe yet fun swim with your family. Happy swimming.

Make sure to check out our posts on:




Related Posts